Products
Rod straightening and cutting machine
The machine is used at the straightening and cutting dead-drawn wires of OL 34, OL 37, OL 42.
The machine is fitted with a rewinder for the support of the wire coil and it’s rolling during the technological process.
*) At request we can make machines with the cutting length of up to 12 m.
The machine is fitted with a rewinder for the support of the wire coil and it’s rolling during the technological process.
| Technical characteristics | |
| Diameter of straightened wire | 4 - 10mm |
| Length of the cut wire | 0,5 - 6m |
| Tolerance of the length of the cut wire | ±5mm |
| Arrow of the straightened wire | Max. 5mm/m |
| Power tension | 380 V/50 Hz |
| Productivity depending on the diameter of the straightened diameter | |
| For wires with large diameters and small breaking resistance | 70m/min |
| For wires with large diameters and large breaking resistance | 100m/min |
| Power and revolution of the driving engine | 18KW; n=1500 rot/min |
| Sizes (Lxlxh) – without the evacuation mass | 1400x1500x1400 mm |
| Net mass | 3800 kg |
| Straightened material | Dead-drawn wire - STAS 438/2-91 for the execution of cloths made of welded wire. |
*) At request we can make machines with the cutting length of up to 12 m.
Machine for welding wire panels MSP 2400
The machine is destined to the welding of the dead-drawn steel wire panels STAS 438/2-91 under
the form of rods.
The machine is equipped with a power table with longitudinal wires and an evacuation table for the welded panels.
USES
Confectioning metallic reinforcements for concrete semi products; for fences, animal cages, shelves, box-pallets, etc.
* At request the machine can be equipped with a grinder with the pitch of the wire extended at 150 mm.
The machine is equipped with a power table with longitudinal wires and an evacuation table for the welded panels.
USES
Confectioning metallic reinforcements for concrete semi products; for fences, animal cages, shelves, box-pallets, etc.
| Technical characteristics | |
| Thickness of the wires | 4-10 mm |
| Width of the panel | Max. 2400 mm |
| Length of the panel | Max. 6000 mm |
| Maximum number of longitudinal wires | 24 pc. |
| Distance between the longitudinal wires | 100; 200 mm |
| Distance between the transversal wires | 50; 100; 150; 200 mm |
| Power tension | 3 x 380V-PE/50Hz |
| Debit of cooling water | Min. 50l/min |
| Pressure of cooling water | 1,5-2,5 bar |
| Type of driving | Hydraulic |
| Productivity (for the panel of 6000x2400 mm and eyes of 100x100 mm) | Approx. 10 panels/hours |
| Size - for the machine - for the equipment |
(Lxlxh) (mm) 1750 x 3500 x 1750 16000 x 6000 x 1750 |
| Power of the transformer of the beneficiary, recommended | 125 KVA |
| Net mass (kg) | 6.000 |
* At request the machine can be equipped with a grinder with the pitch of the wire extended at 150 mm.